This disbabkan because loader or crack windows 7 old version that does not recognize the type of new hardware with a newer bios and there was a crash on startup windows 7
ok not need this at length its solutions
The first first prepare his weapons of war:
DVD installer windows 7 or windows 7 recovery DVD that you have created
its stages:
1. Setting the boot priority to his computer Cd / DVD room. (input also the installer DVD / DVD recovery into his room (it would))
2. if it says "Preset Enter to setup" press the enter key.
3. when loading is complete
- If you are using the DVD installer click install, then click repair, to go to the repair
- If using windows 7 recovery DVD you will be taken straight to the repair menu.
4. select the command prompt to open a cmd window.
5. type this command in her order.
- DISKPART ----> go to partitioning text-based manager
- LIST DISK ----> to display the existing disk and bring disik number (at the left end position)
- SELECT DISK ----> to select the disk with a combination of numbers like this I demonstrated "SELECT DISK 0" (0 is the number of disks that can be seen on the left after doing the command "LISTDISK")
- LIST PARTITION ----> used to seeing numbers like LIST DISK partition.
- SELECT PARTITION ----> useful to select the partition with the partition number combinations example "SELECT PARTITION 1" make sure you choose the type of its Primary partition.
- ACTIVE ----> activate the partition function.
6. up next ketahap mengaktivkan partition, enter the following commands in sequence.
- Bootrec / ScanOs
- Bootrec / fixmbr
- Bootrec / fixboot
- Bootrec / RebuildBcd
7. do startup repair (the menu on the top)
8. when finished restart
9. will appear the "Memory check" leave it alone do not be bothered waiting until the finish.
10. the computer will boot back up and the windows logo appears, but there will be another problem, namely the "Blue Screen" that caused the error and restart Windows again.
11. do not panic booting the installer again to DVD / DVD recovery windows 7 to perform repair.
12. do the same thing on STEEP 7 is re-doing startup repair.
13. when writing the restore click restore, if there is no waiting until the startup repair process is complete.
14. when it is finished restart.
15. The computer will boot and out the windows logo, but a bit longer to get the desktop, just wait do not be turned off forcibly.
completed
Note:
If there is no check and process memory error after the restart do not be afraid, it was better that way and make it easier for you instead:)
If your laptop acer aspire series laptop series or other series failed to cracking windows 7 then just use a multi windows 7 crack for each type of laptop (except apple) can be downloaded below:
- Loader for windows 7 windows 7 7600
- WTO loader remover
0 Comments