to commemorate the mikrotik material which is (ah kbanyakan a) its principal so lah .....
I wrote directly share ..
it points to consider to start operating a router
Do not forget to ask with a "?"
do not hesitate to press the "tab" when forget a command
Ok I'll share some of the commands directly to the router to function as it should ...
this topology
modem ----> (ether1) router (ether2) ---> Client ----> Hub
OK I am working directly on this video thing thing to note in watching this video:
1. not a porn video.
2. each router has 2 interfaces but only one interface in the video so the video just a simple sample just for you.
3. note also the command that I wrote.
command:
ip address add address = 192.168.1.1/24 interfaces = ether1 -----> this command is used to enter the ip on the interface of the ether 1
ip address add address = 192.168.2.1/24 interfaces = ether2 -----> this command is used to enter the ip on the interface ether2
ip firewall nat add chain = srcnat src-address = 192.168.2.1 ------> command is useful to split the connection to the interfaces ether1 to ether2 (which its ip 192.168.2.1)
ip dns set primary = 8.8.8.8 = 8.8.4.4 secondary cache-max-ttl = 1024 ----> this command to add the address of the DNS cache masimum 1024 (I pake DNS google
fileter ip firewall add chain = forward src-address = 0.0.0.0 / 0 dst-port = 80 content = "http://www.facebook.com" action = drop comment = "block fb"; ------ > nah long command serves as a proxy to redirect url http://www.facebook.com to address 0.0.0.0 / 0 with port 80 will not automatically kebuka facebook and browse the web display only a blank white screen.
0 Comments